22958-head
19049-head

Steca TR 0603mc+

6 inputs, 3 outputs

Description

The Steca TR 0603mc+ solar thermal controller is the clear next step in the development of its very successful predecessor, the TR 0603mc. In particular, the Ecodesign Directive (ErP) of the European Union has now been taken into account in order to be able to control solar thermal pumps with an EEI (energy efficiency index) of 0.23. These energy-efficient and high-efficiency pumps (HE pumps) are controlled using a special PWM control signal.

The modular controller concept is a special highlight. 40 pre-programmed equipment systems and numerous additional functions facilitate universal use of the controller right from the start. Depending on the individual requirements, the controller can then be expanded at any time with additional extension and heating circuit modules. The large graphic display shows animated control loops to visualise the operating states of the respective system. The Steca TR 0603mc+ has six inputs for temperature or pulse detection as well as an additional Grundfos Direct Sensors™ input for combined temperature and flow measurement. Three partially speed-controlled outputs are used to control high-efficiency pumps, conventional AC glandless pumps and switching valves.

Steca TR 0603 mc  technische Zeichnung

Features

Product features

  • Flexible and expandable
  • Master-slave concept
  • Compact, multipart designer casing
  • Electronic speed control
  • High level of operational safety through fault diagnosis
  • Hours-of-operation logger
  • Software update possible
  • Storage tank target temperature loading
  • Seasonal systems (loading of pool / storage tank according to the time of the year)
  • Daily pump start
  • Modular extensions are possible with heating circuit controllers and expansion modules
  • Screw terminals allow universal and rapid installation
  • Integrated Steca TPC 1 bus

Displays

  • Multifunction graphical LC display with backlighting
  • Animated representation of the systems and operating states

Operation

  • Multilingual menu navigation
  • Side switch for manual, auto, off

Functions

  • Data logger on SD card
  • Heat quantity (Grundfos Direct Sensors™, pulse generator, determination)
  • Heating return increase
  • Reduction of stagnation phases
  • Holiday (storage tank recooling)
  • Circulation (controlled by temperature / time / pulse)
  • Back-up heating
  • Solid fuel boiler
  • Storage tank quick charge
  • Bypass
  • Thermostat
  • Differential thermostat
  • Timer
  • Interval / tube collector
  • Anti-freeze
  • Anti-legionella cyclical storage tank heating
  • Display storage tank top
  • Two loading zones

Downloads

  •  Steca TR 0603mc+ Datasheet DE · pdf · 0,949 MB
  •  Steca TR 0603mc+ Datasheet EN · pdf · 0.949 MB
  •  Steca TR 0603mc+ manual DE · pdf · 1.797 MB
  •  Steca TR 0603mc+ manual FR · pdf · 2.028 MB
  •  Steca TR 0603mc+ product pic drawing · jpg, 300 DPI, high quality · 0.511 MB
  •  Steca TR 0603mc+ product pic drawing · jpg, 72 DPI, web quality · 0.257 MB

Technical data

 TR 0603mc+
System voltage
230 V AC (± 15 %), 50 Hz
System voltage optional
115 V AC (± 15 %), 60 Hz
Standby
1.57 W
Temperature control class
I
Energy efficiency
1 %
Number of inputs
6
Inputs
5 x temperature (Pt1000), 1 x temperature (Pt1000) or pulse
Additional inputs
1 x Grundfos Direct Sensors™ (temperature / flow rate)
Number of outputs
3
Outputs
2 x triac for speed control (R1, R2), max. 250 W (230 V) or PWM control signal for pump speed (PWM R1, PWM R2); 1 x switch output relay (R3), max. 800 W (230 V) or R3 voltage free
Hydraulic schemes
40
Ambient temperature
0 °C … +45 °C
Interfaces
SD card, RS-232, RS-485 (Steca TPC 1 bus)
Data logging
SD card
Degree of protection
IP 20 / DIN 40050
Dimensions (X x Y x Z)
170 x 170 x 46 mm [0.00 x 0.00 x 0.00 inch]
Weight
450 g [0.00 oz]
 
    x
    Thank you, your request has been sent

    Your request:

    * = mandatory field
    x

    Product comparison

    Not yet able to see all the products you want in the comparison list?
    Add more products

    How it works:
    Open a product group and add the product to the product comparison using the "+ Compare product” button.