Description

The Steca TF A603 MC+ is a stand-alone fresh water controller for heating domestic hot water directly and hygienically using the instantaneous water heater principle.

Thanks to an innovative control algorithm, the Steca TF A603 MC+ controller is able to transfer the energy of a buffer storage tank to the domestic hot water circuit particularly quickly and efficiently. Already after the first commissioning, the self-learning control algorithm of the controller synchronises itself with the individual conditions of the respective system, ensuring a constant domestic hot water temperature from a hygienic perspective.

This is done primarily with the aim of achieving the lowest possible return temperature to the buffer tank in order to further increase the efficiency and yield of a solar system. This is supported by the function of a zone feeding of the buffer storage water using a 3-way switching valve.

The Steca TF A603 MC+ can also control a circulation pump. The controller offers time, temperature or pulse dependent control methods for this purpose.

As a special highlight, the Steca TF A603 MC+ stores the operating data of the system on an SD card. The large graphic display shows the animated control loops to visualise the operating states of the respective system. The Steca TF A603 MC+ has six inputs for temperature or pulse detection as well as an additional Grundfos Direct Sensors™ input for combined temperature and flow measurement. Three partially speed-controlled outputs are used to control pumps and switching valves.

Note: The Steca TF A603 MC+ is only available in conjunction with a fresh water station approved by Kontron Solar GmbH.